t3(ver-10 beta)★☆★☆★☆★☆★☆★☆★☆★☆★☆★☆★☆★☆★☆★☆★☆★☆★☆★☆Please upload at least one picture you made. We will try to reflect it in the official version by referring to the extent of the picture. Any picture is fine, so please upload it.★☆★☆★☆★☆★☆★☆★☆★☆★☆★☆★☆★☆★☆★☆★☆★☆★☆★☆1. This version was designed to produce good pictures even at low sampling steps.2. Please refer to the reference picture (most of the reference pictures apply low Sampling steps. When using higher Sampling steps You will be able to create better pictures.)3. Useful pictures are created from sampling steps 5 or higher.CFG scale is recommended from 6 to 8.2. If the picture is broken above 9We recommend using Dynamic Thresholding. Set the value approximately “-1” lower than the sampling step you set. (Please make additional selections yourself ^o^)4. ADetailer produces a good picture with a face or hand. (I don't know because I haven't tested lora in use.)

t3(ver-10 beta)

t3(ver-09) final version1) Although the model has a large capacity, it can easily create good pictures.2) Please refer to the fromm and options in the sample picture and add a better fromm.Pick a lot of great pictures3) The next model has already been made in version 10, but I have made it a little moreI will draw a picture and reveal it later. (It will be much better)

t3(ver-09)

I haven't decided on a finished version yet, so I'll upload a test version first.▶▶ Stable Diffusion ver1.6 application settings ◀◀▶ These are the results of the actual picture test. After testing more than 10,000 pieces by changing the options below by 1, the best was selected. We will inform you after confirming the figure at which the picture will not be broken.▶ Sampling method recommendation ( ) is the CFG Scale application range. Euler(3~26), Euler a(3~22), DPM2 Karras(1~22), DPM++ 2M SDE Karras (3~25), DPM++ 3M SDE Karras (1~20) Heun(6~17), Restart(1~18), DPM++ 2S a Karras(1~17)▶ Hires. fix - Upscaler recommendation R-ESRGAN 4x+, ScuNET, ScuNET PSNR▶ Sampling steps: 20~40▶ Hires steps: 0~20 (no difference)▶ Upscale by: 1.5~2 (if your PC is good)▶ Denoising strength: 0.10~0.6 (no significant difference)▶ Use ADetailer unconditionally ▷ ADetailer model: No difference, use any one ▷ Only one face can be used for positive prom.▶ Two ways to set CFG Scale Method-1 ▷ Enable Dynamic Thresholding (x) ▷ CFG Scale: 4~7 (If you feel it's a bit strong, turn it down, if that's your style Turn on Enable Dynamic Thresholding and apply -1 above CFG Scale) Method-2 ▷ Enable Dynamic Thresholding (o) ▷ Mimic CFG Scale: -1 lower than CFG Scale ▷ Mimic Scale Scheduler: Cosine Up 1~3 ▷ CFG Scale Scheduler: Half Cosine Up 1~3 ▷ CFG Scale: 18~22▶ Set the rest as you wish. There may be cases where the picture appears strange due to changes in numerical values. So don't worry, instead, run a test and find out the setting range. Please note. Set the rest as you wish (Note: When using a detailer, around 0.1 to 0.5 is good. It doesn't matter if you don't use it.)

t3(ver-09 beta)

<ol><li>t3(ver-08)</li><li>Like a doll? Western style model</li><li>I will simply upgrade the version of the model name to be made in the future.</li></ol>

t3(ver-08)

<ol><li>t3xx3 (b09-ver3) 2nd model out of 9</li><li>t3 model integration + color correction 2nd (feels different from model 1)</li><li>Low-end PC models, high-end options available</li><li>Dynamic thresholds available</li><li>See prompts and setting values in some pictures.</li><li>test Using ddtailer</li></ol>

t3(b09-ver3-2)

<ol><li>t3xx3 (b09-ver3) 1st model out of 9 (3~4 to be released)</li><li>t3 model integration + color correction</li><li>Low-end PC models, high-end options available</li><li>Dynamic thresholds available (recommended 2-5)</li><li>See prompts and setting values in some pictures.</li></ol>

t3(b09-ver3-1)

<ol><li>t3xx3 (b09-ver3) prototype model</li><li>t3xx3 (b09-ver3) integrates only the parts I like from the models I have produced so far (it is unfinished, but one picture is uploaded and displayed at the top right of the picture)</li><li>Low-end PC models, high-end options available</li><li>Dynamic thresholds available</li><li>See prompts and setting values in some pictures.</li><li>The prom of the picture uses the prom left in the picture by other producers (lora X, Neger X)</li></ol>

t3xx3(b09-ver3) prototyp

<ol><li>Focus on expressing feelings in detail step 2 version</li><li>Low-spec PC models, high options available</li><li>Dynamic Thresholding available</li><li>See the prompts and setting values in some pictures.</li><li>5 models left for further testing</li><li>You can see the test process during production at the site below.( <a target="_blank" rel="ugc" href="https://arca.live/b/aimodelmaker">https://arca.live/b/aimodelmaker</a> )</li></ol>( This test picture is printed with the best option available in my house. )

t3xx3(b09-ver2)

<ol><li>Natural skin feel expression step 1 version</li><li>Low-spec PC models, high options available</li><li>See the prompts and setting values in some pictures.</li><li>1 in 8 models (of 7 tested)</li></ol>

t3xx3(b09-ver1)

t3(c1sz0.2)-1

<ol><li>Slightly dark color model</li><li>low spec pc model, rola ( x ), High quality not tested. (Please test and upload)</li><li>Refer to the prompt and setting value in the picture</li><li>Enable Dynamic Thresholding (CFG Scale Fix) Disabled Recommended(Need to adjust the number when using)</li></ol> 5. 1 out of 6 models

t3xx3(d09-pa0.2)

<ol><li>skin tone upgrade</li><li>Enable Dynamic Thresholding (CFG Scale Fix) Disabled Recommended(Need to adjust the number when using)</li><li>1 out of 8 models</li></ol>

t3(xx-v3-a0.12)

<ol><li>low spec pc model</li><li>rola ( x )</li><li>Refer to the prompt and setting value in the picture</li></ol>

t3xx3(b09)

Numerical correction for each part of the t3 model

t3(x3)

basic modelrora : koreandolllikenessV20_v20:0.4, pureerosface_v1:0.2

Type	Checkpoint Merge
Stats	748
Uploaded	Dec 4, 2023
Base Model	SD 1.5
Hash	AutoV2 B35D71AB24