ghost
Sign In

Vodka V2's take on the playful maid of Deliberate v2

00020-565545287.0.png
00019-565545287.0.png
00000-565545287.0.png
00018-565545287.0.png

Generations from Vodka V2 model.

See details about the model here https://followfoxai.substack.com/p/releasing-vodka-v2-and-all-the-details

Upscale sequence used:

After generating the initial image you like in the txt2img tab, send it to img2img.

  • Use the same prompt and sampler as in the original generation

  • Set sample steps high; in our case, we used 150 for most of the images

  • Set width and height to 2x the original. So 512x512 should have 1024x1024

  • Set the denoising strength to something low; we used 0.2 to 0.25.

  • For the CFG value, we used the (original - 0.5) formula. So if the original image was generated at 7.0, we would set it to 6.5.

  • ControlNet settings: enable it; for preprocessor select “tile_resample,” and for model ‘control_v11f1e_sd15_tile’. You can also switch to the “ControlNet is more important” option. No need to adjust any other settings.

  • Make sure to have the “Ultimate SD upscale” extension installed. Select it from the Script dropdown, select the 4x-UltraSharp upscaler, and set tile width and height to 640x640.

  • Press generate, wait a bit, and you should have a decent output. You can repeat the process to go even higher resolution.