Updated: Sep 8, 2024
buildingsDownload
1 variant available
The FLUX.1 [dev] Model is licensed by Black Forest Labs. Inc. under the FLUX.1 [dev] Non-Commercial License. Copyright Black Forest Labs. Inc.
IN NO EVENT SHALL BLACK FOREST LABS, INC. BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH USE OF THIS MODEL.
This model can generate various geometric buildings with colorful glass and walls
Use in combination with other F.1 series models I've released to achieve the best results
Usage Suggestions
Choose Euler as the sampling method, 20 steps can achieve faster speed; to improve quality, you can set the sampling steps to around 40.
The resolution of generated images should not be lower than 1024x1024, otherwise quality may decrease.
It's recommended to use with the F.1 version base model I've released for the best effect.
Must be used with the matching prompts for the F.1 base model, and the word "colorful" must appear for it to take effect.
Recommended weight is 0.7 or above, can be set to 1.
该模型可以生成各种彩色玻璃和墙面的几何建筑
配套我发布的其他F.1系列模型使用才能达到最佳效果
使用建议
1.采样方法选择euler，20步即可达到较快的速度；如需提高质量，可设置40左右的采样步数。
2.生成图片分辨率尽量不要低于1024x1024，否则可能会出现质量下降的情况。
3.建议搭配我发布的F.1版本大模型使用效果最佳
4.需结合F.1大模型的配套提示词，并且必须出现colorful才可生效
5.权重建议为0.7以上，可设置为1